RDA driver

 RDA driver s For Coolsand mobile chips

The RDA driver is a set of USB drivers used to connect devices powered by Coolsand or  (RDA) chipsets to a Windows computer. These drivers enable communication between the devices and the computer, allowing tasks such as firmware flashing and data transfer to be performed

 

Download 

 

To install the RDA driver on a Windows computer, you can follow these steps:

1. Download the RDA driver 

2. Locate the downloaded driver file on your computer. It is often in a compressed (.zip) format.

3. Extract the contents of the driver file to a suitable location on your computer using a file extraction tool like WinRAR or 7-Zip.

4. After extraction, navigate to the extracted folder and find the installer file. It is usually named something like "RDA_USB_Driver.exe" or similar.

5. Double-click the installer file to launch the installation wizard. Follow the on-screen instructions to proceed with the installation.

6. During the installation process, you may be asked to agree to the terms and conditions of the driver. Read through them and accept to continue.

7. Once the installation is complete, it is recommended to restart your computer to ensure the changes take effect.

8. After restarting, connect your Coolsand Miracle or Volcano Box (RDA) device to your computer using a USB cable.

9. Your computer should now detect the device and automatically install the necessary drivers. If prompted, grant any necessary permissions or access to your device.

10. To verify if the RDA driver is installed correctly, you can check the Device Manager on your computer. Right-click on the Start menu, select "Device Manager," and look for your device under the "Portable Devices" or "Other Devices" section.

Contact Us